OPT-G4AD9

G4AD9 0 To +50 mV Input

The G4DA9 time proportional output (TPO) module provides digital control from a Mistic Analog brick or Modular
controller. The module is optically-isolated to 4,000 volts from field devices and features point-to-point electrical isolation.
The analog module mounts on any Opto 22 Brick or Modular controller, and is held in place with a captive screw. The
module switches 5-60 VAC, and together with a power SSR is ideal for controlling heater circuits.
 

	G4AD6	G4AD6HS	G4AD7	G4AD7HS	G4AD9	G4AD11	G4AD12	G4AD13	G4AD22
Nominal Voltage Input	0 to 5 VDC	0 to 5 VDC	0 to 10 VDC	0 to 10 VDC	0 to 50 mV	-5 to +5 VDC	-10 to +10 VDC	0 to 100 mV	0 to 1 VDC
Over/Under Range	-0.3 to 11 VDC	-0.3 to 11 VDC	-0.6 to 22 VDC	-0.6 to 22 VDC	-3.0 to 110 mV	-5.6 to 21 VDC	-11.2 to 42 VDC	-6 to 220 mV	-60 mV to 2.2 VDC
Accuracy*	± 5 mV	± 5 mV	± 10 mV	± 10 mV	± 100 µV	± 10 mV	± 20 mV	± 100 µV	± 1 mV
Response Time % Of Scale Change 5% 63%	8.4 msec 165 msec	< 3 msec < 3 msec	8.4 msec 165 msec	< 3 msec < 3 msec	2 msec 36 mse	8.4 msec 165 msec	8.4 msec 165 msec	2 msec 36 msec	< 3 msec < 10 msec
* Accuracy figure requires use of gain and offset commands.

 

Resolution	12 bits
Isolation (Transient)   Input-to-output   Input-to-analog-supply	4,000 Vrms 4,000 Vrms
Ambient Temperature   Operating   Storage	-30 to 70°C -40 to 85°C