Deutsch 
English B&E Technologies E-104TP
10base-T Ethernet Adapter for ISA Bus
| This is a 16-bit Ethernet NE2000 compatible Adapter for the ISA bus. It supports jumper-less configuration with an easy to use configuration program. It also supports Plug and Play configuration. A single jack connects to unshielded twisted pair (UTP) network cabling. The adapter is supplied with a QNX network driver. A QNX network boot ROM is also available. | |
| LAN Interface | |
| 8/16 bit ISA bus | |
| 10Mbps transmission rate | |
| NE2000 compatible | |
| Full or half duplex auto negotiation | |
| I/0 mapped (Can be set in the range from 200 to 3E0 in increments of 20) | |
| Interrupts (2, 3, 4, 5, 10, 11, 12, 15) | |
| ROM: Optional Boot ROM | |
| RAM: 16KB packet buffer | |
| Jumper-less NE2000 configuration | |
| Configuration via PnP BIOS or supplied QNX setup programs | |
| Uses NE2000 drivers | |
| Operating Environment | |
| Power: | +5V DC @ 0.5A max. |
| Operating Temperature: | 0ºC to 55ºC |
| Storage Temperature: | -40ºC to 70ºC |
| Operating Humidity: | 10% to 90% (non-condensing) |
| Storage Humidity: | 5% to 90% (non-condensing) |
| Physical Specifications | |
| PCB mounted low profile RJ-45 | |
| LED indicator for link status: indicates link is operating normally | |
| Dimensions: 157mm x 60mm (6.18” x 2.36”) | |
| Warranty | 2 years |
| Cabling | Category 3 or better unshielded twisted pair |
| Distance from node to hub: 100m (325 ft) | |
| ALSO AVAILABLE | |
| CT-E001 QNX Boot ROM | |
- Bus
- ISA