Deutsch 
English 20 GbE + 4 GbE Dual-Media Web-Smart Switch (max. 24 ports)
FEATURES:20 (10/100/100Mbps) Gigabit Ethernet (TP) switching ports are compliant with IEEE 802.3, 802.3u, 802.3z and 802.3ab.4 Gigabit TP/SFP fiber are dual media ports with auto detected function. Non-blocking store-and-forward shared-memory Web-Smart switch. Supports auto-negotiation for configuring speed, duplex mode Supports 802.3x flow control for full-duplex ports Supports collision-based and carrier-based backpressure for half-duplex ports Any ports can be in disable mode, force mode or auto-polling mode. Supports Head of Line (HOL) blocking prevention. Supports broadcast storm filtering Web-based management provides the ability to completely manage the switch from any web browser Supports Port-based VLAN and Tag-based (IEEE 802.1Q) VLAN. Auto-aging with programmable inter-age time. Supports 802.1p Class of Service with 2-level priority queuing. Supports port trunking with flexible load distribution and failover function. Supports port sniffer function. Programmable maximum Ethernet frame length (jumbo frame). Efficient self-learning and address recognition mechanism enables for warding rate at wire speed. |  |
MANAGEMENT SUPPORT:
System ConfigurationAuto-negotiation supports on 10/100/1000Base-T ports, Web browser can set transmission speed (10/100/1000Mbps) and operation mode (Full/Half-Duplex) on each port, enable/disable and ports, set VLAN group, set Trunk Connection.
VLAN Function
Port-based/802.1Q-Tagged, allowed up to 24 active VLANs in one switch
Trunk Function
Ports trunk connections allowed
Bandwidth Control
Support by-port Egress/Ingress rate control
Quality of Service (QoS)
Referred as Class of Service (CoS) by the IEEE 802.3P standard. Two queues per ports allowed.
Networking Management
Web browser supports based on HTTP Server
TECHNICAL SPECIFICATIONS
- Standard Compliance: IEEE 802.3 / 802.3ab / 802.3z / 802.3u / 802.3x
- Network Interface:
24 (RJ-45) 10/100/1000Mbps Gigabit TP
4 (SFP) 1000Mbps Gigabit fiber
Note: Port 21, 22, 23, and 24 can only be used either RJ-45 or SFP media, not both. Switch provides auto-detect function for port media selection. - Add-On Modules (Sold Separately):
DX-SFP.SX — 1000Base-SX Multi-Mode SFP Duplex-LC, 850nm
DX-SFP.L10 — 1000Base-LX Single-Mode/10km SFP Duplex-LC, 1310nm
DX-SFP.L40 — 1000Base-LX Single-Mode/40km SFP Duplex-LC, 1310nm
DX-SFP.L70 — 1000Base-LX Single-Mode/70km SFP Duplex-LC, 1550nm
DX-SFP.3L20 — 1000Base-LX Single-Mode/20km SFP Simplex-LC, TX 1310nm
DX-SFP.5L20 — 1000Base-LX Single-Mode/20km SFP Simplex-LC, TX 1550nm - Transmission Mode:
10/100Mbps supports full- or half-duplex
1000Mbps supports full-duplex only - Transmission Speed:
10/100/1000Mbps for TP (RJ-45)
1000Mbps only for fiber (SFP) - Full forwarding/Filtering Packet Rate: PPS (packets per second)
1000Mbps = 1,488,000 PPS
100Mbps = 148,800 PPS
10Mbps = 14,880 PPS - MAC Address and Self-learning: 8K MAC address
- Buffer Memory: Embedded 400KB frame buffer
- Flow Control:
IEEE 802.3x compliant for full-duplex
Backpressure for half-duplex - Cable and Maximum Length:
TP (RJ-45) = Cat. 5 or better UTP cable, up to 100m
1000Base-SX SFP = Multi-mode fiber, up to 220~550m (cable dependent)
1000Base-LX SFP = 9/125µm Single-mode fiber, up to 10~70km (SFP dependent) - Diagnostic LED:
System LED — Power
Per Port LED (RJ-45) — LINK/ACT, 10/100/1000Mbps
Per Port LED (SFP) — SFP(LINK/ACT) - Power Requirement:
Voltage — 100~240 V
Frequency — 50~60 Hz
Consumption — 30 W - Ambient Temperature: 0° to 50° C
- Humidity: 5% to 90%
- Dimension: 44(H) x 442(W) x 209(D) mm
- Comply with FCC Part 15 Class A & CE Mark Approval