OPT-SNAP-PS24

SNAP-PS24 SNAP Power Supply, 110 VAC to 24 VDC

The SNAP-PS24 power supply provides 24 volts (0.75 amps) of DC power and requires a 120 VAC input. This power
supply is ideal for powering a SNAP PAC S-series controller (such as the SNAP-PAC-S1) or for providing loop power for
SNAP analog modules mounted on a SNAP PAC rack.
 
AC power connections are made to a removable terminal strip on top of the power supply. DC output power is hooked
up using the attached wiring harness.
 
For larger loads (up to 1.25 amps) or an input of 100-250 VAC, see the SNAP-PS24U.
 
NOTE: The SNAP-PS24 can also be used to provide loop power for analog modules on a SNAP M-series or B-series
rack.
 

	SNAP-PS24	SNAP-PS24U
Input Voltage	95–130 VAC, 47–63 Hz	100–250 VAC, 47–63 Hz
Output Voltage	24 ± 0.6 VDC	24 ± 0.1 VDC
Output Current	0.75 A	1.25 A
Dimensions	4.05˝ x 4.89˝ x 2.00˝	6.34˝ x 4.13˝ x 2.53˝
Weight	2.1 lbs (952.54 g)	1.9 lbs (863.63 g)
Operating Temperature	0 to 70 °C	0 to 70 °C
Storage Temperature	-30 to 85 °C	-30 to 85 °C
Torque, connector screws	4.5 in-lb (0.51 N-m)	4.5 in-lb (0.51 N-m)
Fuse	Opto 22 PN: SNAP-FUSE1AB Vendor PN: GDC-1A (Bussman)	Internal fuse