Deutsch 
English | SNAP-AOV-5 SNAP 1-Ch 0-10VDC Analog Voltage Output Module |
  |
output that eliminates ground loops and has a nominal output range of 0-10 VDC. The module is transformer isolated
and optically isolated from other modules and devices, and is factory calibrated.
Part of the SNAP PAC System, the module mounts on a SNAP PAC rack with a SNAP PAC brain or rack-mounted
controller. Analog, digital, and serial I/O modules can all be on the same rack. Such an I/O unit is also well suited for
PC-based control or for use as intelligent remote I/O for an Allen-Bradley MicroLogix or other RSLogix-based PLC
system, such as ControlLogix or CompactLogix.
For a similar two-channel module, see SNAP-AOV-25.
| Input | 12-bit serial data |
| Outputs | 0 to +10 Volts DC (floating) |
| Span | 10 Volt span |
| Resolution | 2.44 mV |
| Response Time (% of span/delta V/delta time) | 99.9%/19.98 V/3 mS |
| DC Common Mode Rejection | >-120 dB |
| AC Common Mode Rejection | >-120 dB @ 60 Hz |
| Maximum Operating Common Mode Voltage | 250 V |
| Common Mode Resistance | >1000 Megaohms |
| Load Current | 10 mA (floating) |
| Short Circuit Current Continuous | 125 mA (typical) |
| Accuracy | 0.1% of Span |
| Gain Temperature Coefficient | 50 PPM/°C |
| Offset Temperature Coefficient | 20 PPM/°C |
| Power Requirements | 5 Volts DC @ 150 mA |
| Ambient Temperature: Operating Storage | 0 °C to 70 °C -25 °C to 85 °C |
| Agency Approvals | UL, CE, FM, RoHS, DFARS |
| Warranty | Lifetime |