99582-1 DeviceMaster UP 16 Modbus 16-Port industrial Ethernet serial device server with RJ45 connections
Höhepunkte
Unter Modbus-Konnektivität zu neuen Höhen, Comtrol stellt die Devicemaster UP 16-Port Modbus-Gateway. Auf einem kompakten, Low-Profile-Gehäuse eingebaut, packt es sowohl Port-Dichte und erweiterte Modbus Connectivity-Features entwickelt, um selbst zu vereinfachen die anspruchsvollsten Installationen. Mit der neuesten Modbus Router Firmware geladen, das ist die am weitesten fortgeschrittene Modbus-Gateway auf dem Markt heute.
- Verfügt über alle Funktionen des Modbus-Router-Anwendung
- Konfiguration und umfassende Diagnose über On-Board-Web-Server zur Verfügung
- Low Profile - kompaktes Gehäuse ermöglicht eine einfache Installation und Montage
- 16 RS-232/422/485-Software wählbare Ports mit Abschlusswiderständen
- Dual 10/100 Fast Ethernet Ports
- PortVision® DX Windows-Software für eine schnelle Inbetriebnahme und Remote-Management
- RoHS 2 unter CE-konform
.jpg)
Eine hoch entwickelte Modbus-Gateway mit einer Vielzahl von Modbus-Connectivity-Optionen - Der Devicemaster UP 16 Modbus ist für die Installation und Wartung von selbst komplexester Modbus-Anwendungen zu vereinfachen.
- Bus Interface Specification10/100BASE-T Ethernet
- Memory - SDRAM16 MB
- Flash8 MB
 
- EnclosureBlack Finished Steel
- Installation MethodPanel mountable
- LED IndicatorsPower, Status, Ethernet Link/Activity per port, Serial Link/Activity per port
- Dimensions11.5" x 1.5" x 5.5"
 292 x 38 x 140 mm
- Product Weight2.45 lbs 
 1.11 kg
- Input Voltage Requirements9-30VDC
- Power Consumption4.5 Watts - Comtrol External Power Supply(included)
- Input90-264VAC @ 47-63Hz
- Output24VDC @ 500mA
 
- ESD Surge ProtectionProvides minimum of 15KV protection on all serial lines. All Ethernet components are rated to 1.5KV magnetic surge protection.
- Air Temperature - System On0° to 60°C
- System Off-40° to 85°C
 
- Operating Humidity0% to 95%
- Altitude10,000 ft 
 3,048 m
- Mean time between failures (MTBF)39.1 years
Serial Communications
- Connector TypeRJ45
- Number of Ports16
- Serial InterfacesRS-232
 RS-422
 RS-485, 4-wire, Slave 
 RS-485, 2-wire
- Terminal Resistor for RS-422/485Software controllable 120Ω termination resistors available for each transmit and receive differential pair on every port. The 120Ω termination resistors can be enabled between TX+ and TX- OR RX+ and RX- or both on every port.
- Baud Rate300bps to 230Kbps
- Receive Buffer4.5 KB
- Transmit Bufferr4.5 KB
- Device Driver Data Control - Data Bits*5, 6, 7, or 8
- Parity**Odd, Even, Mark, Space, or none
- Stop Bits***1, 1.5, or 2
- * Data bits 5, 6 are supported only in RFC2217 and socket mode
 ** Mark, Space parity are supported only in RFC2217 and socket mode
 *** Stop bit 1.5 is supported only when used with 5 data bits
 
- Supported ControllersModbus/TCP Masters
 Modbus/RTU and Modbus/ASCII serial masters
 Modbus/RTU and Modbus/ASCII over Ethernet TCP/IP masters
- Supported DevicesModbus/TCP slaves
 Modbus/RTU and Modbus/ASCII serial slaves
 Both remote Modbus serial slaves and raw/ASCII devices (with additional gateways)
- Number of Ports2
- Speed10/100Mbps
- Connector TypeRJ45 Auto MDI/MDI-X
- Ethernet specific featuresEthernet packet switching, auto negotiation, Link/Activity Status LED
- Network ProtocolsARP, BOOTP, DHCP/RARP, HTTP, HTTPS, SSH, SSL/TLS, ICMP, RFC 1006 (ISO over TCP), SNMP (MIB-II), TCP/IP & UDP socket services, Telnet, and TFTP, and supports IP multicast data transmission
- SNMP SupportMonitoring only
- Other Software FeaturesLowest Latency
 NS-Link COM/TTY port redirector
 TCP/IP & UDP Socket Services
 Telnet/RFC2217 COM Port Control
 PortVision DX remote management
- Manufacturer's Warranty5 Years
- Packaged Shipping Weight4.85 lbs 
 2.2 kg
- Package Dimensions14.9" x 4" x 10.9"
 378.5 x 101.6 x 276.9 mm
- UPC Code7-56727-99582-1
- Country of OriginUSA
- ECCN5A992
- Schedule B Number8471.80.1000
- Device DriversMicrosoft® Windows® 7
 Microsoft® Windows® 2008 Server
 Microsoft® Windows® Vista
 Microsoft® Windows Server® 2003
 Microsoft® Windows® XP
Regulatory Standards
- EmmissionsFCC Part 15 Subpart B - Class A limit
 Canadian EMC Requirements: ICES-003
 European Standard EN55022
- ImmunityEuropean Standard EN55024:
 IEC61000-4-2/EN61000-4-2: ESD
 IEC61000-4-3/EN61000-4-3: RF
 IEC61000-4-4/EN61000-4-4: Fast Transient/Burst
 IEC61000-4-5/EN61000-4-5: Surge
 IEC61000-4-6/EN61000-4-6: Conducted Disurbance
 IEC61000-4-8/EN61000-4-8: Magnetic Field
 IEC61000-4-11/EN61000-4-11: Voltage dips and variations
- SafetyIEC 60950/EN60950 (LISTED)
 CSA C22.2 No. 60950/UL60950 Third Edition
- OtherRoHS 2 Compliant
 
  Deutsch
 Deutsch  English
 English 
.jpg)

