Deutsch 
English TRP-C37A RS232/422/485 Serial Device Server with Remote Monitoring
?Introduction
In addition to serial server function, The TRP-C37A is able to remote monitoring serial device.
There are 2 models to choose from:
Automatic monitoring mode:
The Serial device must be sends a single pulse to TRP-C37A continually per 30 seconds.
If serial device do not send a single pulse over 30 seconds ,the TRP-C37A will be actives the relay.
Manual mode:
If the serial device need to restart, user can feel free to set the relay enable through the TRP-C37 A web configuration.
?Features
?
-
Automatic remote monitoring serial device.
-
Automatic restart the serial device.
-
Direct active the relay by web based utility.
-
Read the counter value and DI status from web based utility.
-
Adjustable relay latch time from web page.
-
Wide input range DC power supply.
-
Power Input detection circuit.
-
External watchdog function prevents system or power fail.
-
Support Auto-MDIX twisted pair crossover detection and Auto-Correction.
-
Maximum Connection 16 Client PC at Server Mode.
-
Maximum 8 sets host IP that limits network access.
-
Surge protection and over current and over voltage on RS-422/485 data lines.
-
Support baud rate form1200~921600Kbps.
-
Auto switching RS-232/422/485 signal interface.
-
Virtual COM drivers for Windows 98/WIN2000/WIN XP/Vista/WIN2003/WIN 7/WIN 8/WIN 8.1 and WIN10.
-
Virtual Com Support Server, Client, UDP mode.
-
Fully compatible with Ethernet and TCP/IP protocol.
-
Supports 10/100 Mbps Ethernet.
-
Power/Link/RX/TX mode LED indicator.
-
Heart Beat function ensures a reliable communicating connection.
-
Auto Pair-mode when power or Ethernet fails.
-
Back to factory by external switch.
-
Support configuration by serial console.
-
Update the firmware from LAN.
-
Dual power input select from screw terminal or DC-jack
?
?
Specifications
?
-
Power Input Voltage: DC +10V to +30V.
-
LAN: Auto-MDIX, 10/100 Mbps Auto-detecting.
-
RS-232: TX, RX, RTS, CTS, DTR, DSR, DCD, GND.
-
RS485 signal: differential 2 half-duplex wires (DATA+, DATA-).
-
RS422 signal: differential 4 full-duplex wires(TX+,RX+,TX-,RX-).
-
Data Rate: 1200,2400,4800,9600,19200,38400,57600,115200,921600 K bps .
-
Parity: none, even, odd.
-
Data Bits: 5, 6, 7 or 8.
-
Stop Bits: 1, 1.5 or 2.
-
Protocol: TCP, IP, ARP, DHCP, Telnet, HTTP, UDP, ICMP
-
External switch 1,2:OFF/OFF :TCP and VSP mode.
ON/ OFF : Option .
OFF/ON :Option.
ON/ON :Back to Factory.
-
Virtual-Com RS232 TXD,RXD,GND.
RS422 TX+,TX-,RX+,RX-.
RS485 DATA+,DATA-.
-
Heartbeat function: TCP 5300 port send a strings per 5 seconds.
-
Maximum TCP connections at the same time: 16.
-
Digital I / O connector: D-type 9PIN female.
-
Digital input an effective voltage: DC +/- 4 ~ 30V.
-
Digital Input count : 0~65535.
-
Relay setting start to closing time: 1 ~ 255 (ms / unit).
-
Relay specifications: two independent NC, COM, NO.
-
Relay contact capacity: AC 125V / 0.5A, DC 30V / 2A, DC110V / 0.3A.
-
Power supply: Screw terminal or DC jack .
-
Serial interface: +/-15 KV ESD.
-
RS422/485 interface: Surge, over current, over voltage protection.
-
Power consumption: 12V/150mA.
-
Operating Temperature:-10 to 65 °C.
-
Humidity: 0~90% Non-Condensing.
-
Dimensions: 151(L)*75(W)*26(H) mm.
-
Weight: 410g with packing.
AccessoriesLI-232-9F9F(Option)1.8M D-SUB 9 pin female to female Null-Modem cable
PWR-AD12V-Auto (Option)Switching Adaptor
Input:100~240VAC 50/60Hz 260mA
Output: DC 12V/1A
Certificate: CE, FCC, UL, PSE
US Specification
We also provide the EU / AUS / British specifications(MOQ:50PCS/2 Weeks)
T-snap (Option)DIN rail mounting adapter
- Ports
- 1-port