SEA-HUB4P-OEM

SEALEVEL HUB4P-OEM 4-Port USB 2.0 Hub OEM
For industrial computing applications that require embedded USB ports, the HUB4P-OEM with four downstream USB ports is the ideal solution. The hub is USB 2.0 compliant, providing a full 480M bps data rate to the host, and is backwards compatible with USB 1.1 and 1.0 devices. The HUB4P-OEM includes a +5V power cable that sources power from a standard hard drive connector and supplies a full 500mA to each attached USB peripheral. Supported in Windows, Linux, and other USB aware operating systems, the HUB4P-OEM requires no separate drivers. A 2mm 4-pin Molex vertical header provides an internal USB connection to your host system. For EBX and larger motherboards with a 0.1" onboard USB header, order the CA260 internal USB cable. For smaller motherboards with a 2mm onboard USB header, order the CA383 internal USB cable. Standard operating temperature range is 0°C to 70°C and extended temperature range (-40°C to +85°C) is optional. The HUB4P-OEM is perfect for adding up to four iPorthole Digital I/O modules to your embedded application. The optional CA382 internal USB cable provides the connection from the downstream USB ports on the HUB4P-OEM to the USB connector on iPorthole modules. The intelligent Porthole design is perfect for expanding industrial computing platforms using only an internal USB connection. iPorthole modules include an intelligent USB I/O board with Sealevel’s innovative Porthole mounting plate for installation in a Relio or custom enclosure. Simply design the 3.2" x 3.1" Porthole mounting footprint into your enclosure to mix and match iPorthole USB I/O modules for maximum configurability. The Porthole footprint offers a standardized method for interfacing real-world I/O connections. The HUB4P-OEM allows you to connect up to four iPorthole modules using only a single USB connection on the motherboard.

Features:

• Powered USB hub provides four downstream USB ports with 500mA available per port
• Status LED indicates internal connection to the host
• USB (Universal Serial Bus) 2.0 compliant hub
• Backwards compatible with USB 1.1 and USB 1.0 devices
• Supports high-speed 480M bps, full-speed 12M bps and low-speed 1.5M bps operation
• Supported in Windows 98SE/ME/2000/XP/Vista, Linux kernel v2.4 or greater, and other USB aware operating systems
• Includes +5V internal power cable
• Uses Molex 4-pin vertical 2mm locking header for USB connection (Mating connector Molex# 35507-0400)