DAN-S5208

TECHNICAL SPECIFICATIONS

• Model: S5208
• Standards: IEEE 802.3u 100Base-FX/TX, 802.3 10Base-T, 802.3x, 802.1p, 802.1Q, 802.1D, 802.1W
• Processing: Store and Forward switching architecture
• Packet Filter: Broadcast packet filtering
• Connectors:
  Two (2) 100Base-FX Multi-Mode Duplex-SC 1310nm
  Six (6) 100Base-TX RJ-45 (auto MDI/MDI-X)
• Cable / Max Distance:
  100Base-FX — 50/125, 62.5/125µm Multi-Mode fiber, up to 2km
  100Base-TX — UTP/STP Cat. 5 or above, EIA/TIA-568 100-ohm, up to 100m
  10Base-T — UTP/STP Cat. 3 or above, EIA/TIA-568 100-ohm, up to 100m
• LEDs:
  Unit — Power, Power1, Power2, Fault, R.M.
  Per Port — Link/Activity, Full-Duplex/Collision
• Alarm: Relay output for port break and power failure
• Redundancy:
  Network — Super Ring with recovery time less than 50ms up to 200 PCs, RSTP, STP
  Power — Dual power inputs 24V DC
• Management:
  • Protocols
    SNMP v1/v2c, RMON1 (Statistics, History, Alarm, Events), SMTP, SNTP, IGMP v1 & Query mode, DHCP/Client, TFTP
  • MIBs
    MIB-II, Bridge MIB, Ethernet-Like MIB, VLAN MIB, Private MIB
  • Configuration
    Web-based Management w/ Default button provided to restore factory default settings
  • VLAN
    Support Port-based VLAN & IEEE 802.1Q Tag VLAN
  • Quality of Service (QoS)
    Four (4) priority queue per port
  • Port Mirroring
    Online traffic monitoring on selected port(s)
  • IP Security
    IP addresses are used to define access levels
  • E-mail Warning
    Pre-defied events
• Performance:
  • Transfer Rate:
    148,800pps for Fast Ethernet port & 14,880 for Ethernet port
  • Transfer Packet Size:
    64 bytes to 1522 bytes (with VLAN tag)
  • MAC Address — 2K MAC address table
  • Memory Buffer — 1Mbits
  • Back-plane — 3.2Gbps
• Power Requirements:
  24V DC (12 to 48V DC)
  [ Reserve Polarity Protection: Present ]
• Power Consumption: 6.7W (at 24V)
• Environmental:
  Operating Temperature — -10° to 70° C
  Storage Temperature — -40° to 85° C
  Operating Humidity — 5% to 95% (non-condensing)
• Mechanical:
  Installation — DIN-Rail Kit, or wall mounting ears
  Casing — IP30 protection, aluminium case
  Dimension — 135 x 53 x 105mm (H x W x D)
• Regulatory Approvals: FCC Class A, CE Mark
• MTBF: 315,109 hours * MIL-HDBK-217F GB (Military Handbook) standard