Deutsch 
English The M4SENET-100 provides an Ethernet interface for M4 series controllers such as the SNAP-LCM4 and the M4RTU. Connection is via a 10Base-T or 100Base-TX link, and standard TCP/IP transport is used for all transactions. NOTE: This Ethernet card is designed for use with FactoryFloor software.
| ItemSpecification | |
| Card Type | Ethernet NIC, communication coprocessor |
| Transports Supported | TCP/IP |
| Maximum Sessions | 128 total; up to 128 for SNAP Ethernet I/O, up to 32 for host or peer |
| Communications | Ethernet 10Base-T or 100Base-TX Auxilliary: RS-232C (for maintenance and kernel downloads) |
| Data Rate | 10 or 100 Mbps auto-detected on Ethernet 19.2 Kbps or software selectable on serial port (maximum 115.2 Kbps) |
| Cable Type | Solid-core unshielded twisted pair, Category 5 recommended for 10 Mbps and required for 100 Mbps |
| Maximum Distance | 100 meters from hub tu node for single segments |
| Connectors | One RJ-45 Ethernet One five-position Phoenix type for serial port |
| Current Draw | 1.00 Amps |
| Jumpers (Internal) | Boot to kernel/Boot to loader Normal operation/Restore factory defaults |
| Operating Temperature | 0 to 70°C |
| Storage Temperature | -40°C to 85°C |
| Humidity | 0-95% humidity,non-condensing |