Deutsch 
English | SNAP-AIV-i SNAP 2-Ch Isolated -10VDC to +10VDC Analog Voltage Input Module |
  |
VDC or for -5 to +5 VDC operation. In addition to having two channels isolated from each other, the module is also
transformer isolated and optically isolated from other modules and devices.
Part of the SNAP PAC System, the module mounts on a SNAP PAC rack with a SNAP PAC brain or rack-mounted
controller. Analog, digital, and serial I/O modules can all be on the same rack. Such an I/O unit is also well suited for PC-
based control or for use as intelligent remote I/O for an Allen-Bradley RSLogix PLC system, such as ControlLogix,
MicroLogix, or CompactLogix.
If you do not need channel-to-channel isolation, see SNAP-AIV.
| Input Range | From -10 volts to +10 volts From -5 volts to +5 volts |
| Maximum Over Range | ± 10% (= ± 27500 counts) |
| Resolution | 0.4 mV when configured -10 volts to +10 volts 0.2 mV when configured -5 volts to +5 volts |
| Input Filtering | -3 dB @ 64 Hz |
| Input Response Time (% of span/ DV / Dt) | 63.2% / 6.7 V / 10 mS |
| DC Common Mode Rejection | >-120 dB |
| AC Common Mode Rejection | >-120 dB @ 60 Hz |
| Maximum Survivable Input | 220 VAC or 300 VDC |
| Maximum Operating Common Mode Voltage | 250 V |
| Accuracy | 0.05%, 5 mV @ 10 VDC 2.5 mV @ 5 VDC |
| Gain Temperature Coefficient | 30 PPM/ °C |
| Offset Temperature Coefficient | 15 PPM/ °C |
| Isolation: Optical | 4000 V |
| Isolation: Transformer | 1500 V |
| Isolation: Channel to Channel | 250 V continuous (1500 V transient) |
| Power Requirements | 5 VDC (±0.15) @ 200 mA |
| Input Resistance | 1 megohms (each channel) |
| Torque, hold-down screws | 4 in-lb (0.45 N-m) |
| Torque, connector screws | 5.26 in-lb (0.6 N-m) |
| Agency Approvals | CE, FM, RoHS, DFARS |
| Warranty | Lifetime |