Deutsch 
English | SNAP-PAC-RCK8-FM SNAP PAC 8-Module Mounting Rack, Factory Mutual Approved |
  |
special-purpose SNAP I/O modules. The SNAP-PAC-RCK8-FM can be DIN-rail or panel mounted.
This rack works with all SNAP I/O modules on the Opto 22 website. Analog, digital, and serial modules can be mixed on
the rack and placed in any position. (Some serial modules are limited to a maximum of eight on one rack. See module
data sheets for limitations and power requirements.)
Together with I/O modules and a brain or rack-mounted controller, this rack forms an I/O unit that provides distributed
control in a SNAP PAC System. The I/O unit can also be used for PC-based control or as intelligent remote I/O for an
Allen-Bradley MicroLogix PLC or other RSLogix-based system, such as ControlLogix or CompactLogix.
The SNAP-PAC-RCK8-FM is Factory Mutual-approved. If you do not need FM approval, see the SNAP-PAC-RCK8.
Other SNAP PAC racks available:
SNAP-PAC-RCK4-FM for 4 modules
SNAP-PAC-RCK12-FM for 12 modules
SNAP-PAC-RCK16-FM for 16 modules
| Power1 Requirements | 5.0 to 5.2 VDC @ 4.2 Amps max | |
| I/O Processor2 Compatibility | SNAP-PAC-R1 SNAP-PAC-R2 SNAP-PAC-EB1 SNAP-PAC-EB2 SNAP-PAC-SB1 | SNAP-PAC-R1-FM SNAP-PAC-R2-FM SNAP-PAC-EB1-FM SNAP-PAC-EB2-FM SNAP-PAC-SB2 |
| Replacement Fuse | SNAP-FUSE7.5AB or Littelfuse 297 07.5 | |
| Rack Power Terminals Wire Size | 22 to 14 AWG | |
| Operating Temperature | 0 to 70 °C | |
| Relative Humidity | 95%, non-condensing | |
| 1 Power requirements shown are for a rack, a processor, and a full load of analog modules. Power requirements for SNAP serial and high-density modules are higher. 2 “I/O Processor†means a SNAP PAC brain or SNAP PAC on-the-rack controller. | ||