Deutsch 
English B&E Technologies GE-100
Gigabit Ethernet Adapter for PCI Bus
| The GE-100 Gigabit Ethernet Adapter PCI is a 32-bit LAN adapter for use in personal computers with a Peripheral Component Interconnect (PCI revision 2.2 or later) computer bus. This adapter is a Tri-speed adapter that features a single RJ45 connector for either a 10 Mbps (megabits per second) IEEE 802.3 or 100Mbps IEEE 802.3u or 1000Mbps IEEE 802.3ab Ethernet network connection over unshielded twistedpair (UTP) cable. The adapter can automatically negotiate 10/100/1000 Mbps, full or half duplex. | |
Adapter Features | |
| High performance bus master operation with low processor utilization | |
| Boot ROM socket (QNX 4 Boot ROM available) | |
| QNX 4 network driver and boot ROM configuration program supplied on the adapter driver diskette | |
| Automatically senses 10/100/1000 Mbps (10base-T/100base-T/1000base-T) connection and configures the speed accordingly | |
| Auto negotiation or software configurable to operate in full-duplex mode, increasing aggregate bandwidth up to 2000 Mbps | |
| Status LED’s indicates link up, link speed and network activity | |
| Automatic crossover support for crossover or regular cabling | |
| UTP Category 5 cabling | |
| Operating Environment | |
| Power: | +3.3VDC @ 378mA max. |
| Operating Temperature: | 0ºC to 50ºC |
| Storage Temperature: | -25ºC to 70ºC |
| Operating Humidity: | 10% to 70% (non-condensing) |
| Storage Humidity: | 10% to 90% (non-condensing) |
| Physical Specifications | |
| PCB mounted low profile RJ-45 connector | |
| LED indicators for: link status, speed, network activity | |
| Dimensions: 120mm x 58mm (4.72" x 2.0") | |
| Warranty | 2 years |
| Cabling | Category 5 unshielded twisted pair |
| Maximum cable length 100m (325 ft) | |
- Bus
- PCI