Corman CT-FE304

CT-FE304

CorNet 100base Ethernet Hub 4 Port

100Mbps operation IEEE 802.3u standard for class II 100base-TX hubs

• 5 unshielded twisted pair ports
• Cable lengths up to 100 meters using category 5 unshielded twisted pair cabling
• Cross-over jack for connecting hubs
• Auto-partition and recovery on each port
• TABLE and wall mountable
• Diagnostic LEDs for power, collision, and link/activity status
• External power supply (12VDC @ 800mA)

This 100Mbit extension to the Ethernet standard allows significantly increased network throughput over 2 pairs of category 5 twisted pair wiring. The CorNet Fast Ethernet products are guaranteed to work with QNX.

DESCRIPTION

This is a Fast Ethernet hub designed as a workgroup hub for the 100base-TX environment. It has 4 Unshielded Twisted Pair (UTP) jacks for connection to other 100base-TX devices. It also provides an uplink port for connections to other hubs.

OPERATING ENVIRONMENT

• Power: 12 VDC @ 800mA
• Operating Temperature: 0°C to 40°C
• Operating Humidity: 10% to 90% (non-condensing)

FAST ETHERNET LAN INTERFACE

• Connectors: 5 Shielded RJ45 for Category 5 UTP

PHYSICAL SPECIFICATIONS

• Height 26mm (1.0" )
• Width 144mm (5.7")
• Depth 100mm (4.0")
• LED indicators for Link/receive activity, collision, and power.
• Included with the hub is a TABLE and magnetic mounting kit.

WARRANTY

• 2 years

INSTALLATION CONSIDERATIONS

Twisted Pair Cable Type

• Category 5 unshielded twisted pair

• From node to hub: 100m (325 ft)
• Total network span: 210m (690 ft)

CONFORMS TO THE FOLLOWING STANDARDS

• 100TX: IEEE 802.3u 100base-TX (Class II repeater)
• EMC: EN55022:1994, CISPR 22 Class A
  EN50082-1
  IEC 801-2, 8KV Air
  IEC 801-3, 3V/m
  IEC 801-4, 0.5KV Signal line, 1KV Power line
  EN60555-2
• European CE compliance