99610-1 DeviceMaster RTS 4-Port 2E DB9 4-port serial device server with DB9 connections and Ethernet switch - Extended temp. and NEMA TS2
This quality DeviceMaster RTS 4-Port DB9 2E Ethernet device server will keep your networks operating in extreme temperatures
Part Number: 99610-1
- Wide DC input voltage range (5-30 volts)
- Redundant power input for fail-safe power
- RS-232/422/485 software selectable interfaces
- DB9 male serial connectors
- PortVision DX
- Screw terminal power connector
- Dual Ethernet ports for daisy-chaining devices
- 25KV surge protection for serial ports
- Features DIN rail mounting
- Wide operating temperature range (-40º to 75º C)
- NEMA TS2 certified
- SSL & SSH management, SSL serial data stream encryption
- IPv6 support
- Real-time email event notification
The DeviceMaster RTS 4-Port DB9 2E serial device server can be used to network-enable four serial devices on any Ethernet network and is ideal for applications in: traffic and transportation, power utility, industrial automation, material handling and any project that requires serial-to-Ethernet communication with DIN rail-based equipment installations.
Includes:
- DeviceMaster RTS 4 Port DB9 2E Device
- Loopback Plug
- DIN rail
Hardware
- Interface Specification10/100BASE-T Ethernet
- Memory
- SDRAM32 MB
- Flash8 MB
- EnclosureUL94-V0 Plastic
- Installation MethodDIN Rail (35mm)
- LED IndicatorsStatus, Ethernet Port Link and Activity
- Dimensions4.6” x 3.9” x 1.8”
116.8mm x 99.1mm x 45.7mm - Product Weight0.45lbs
204.12g
Electrical Specifications
- Input Voltage5 – 30VDC
- Power Consumption (Max.)3.0 Watts
- Power Input RedundancyDual Redundant Power Input
- ESD Surge ProtectionProvides minimum of 25KV protection on all serial lines. All Ethernet components are rated to 1.5KV magnetic surge protection.
Environmental Specifications
- Air temperature
- System On-40 to 75°C
- System Off-40 to 85°C
- Operating Humidity (non-condensing)0% to 95%
- Altitude0 to 10,000 Feet
3,048 m - MTBF (Mean Time Between Failures)42.3 Years
Serial Communications
- Connector TypeDB9 Male
- Number of Ports4
- Software InterfacesRS-232
RS-422
RS-485, 4-wire, Master
RS-485, 4-wire, Slave
RS-485. 2-wire - Termination Resistor for RS422/485Software controllable 120Ω termination resistors available for each transmit and receive differential pair on every port. The 120Ω termination resistors can be enabled between TX+ and TX- OR RX+ and RX- or both on every port
- Baud Rate300 bps to 230 kbps
- Receive Buffer4.5 KB
- Transmit Buffer4.5 KB
- Device Driver Data Control
- Data Bits*5, 6, 7 or 8
- Parity**Odd, Even, Mark, Space, or none
- Stop Bits***1, 1.5, or 2
- Flow ControlHardware, Software, None
- *Data bits 5, 6: Supported only in RFC2217 and socket mode
- **Mark, Space parity: Supported only in RFC2217 and socket mode
- ***Stop bit 1.5: Supported only when used with 5 data bits
Ethernet Specifications
- Number of Ports2
- Speed10/100Mbps
- Connector TypeRJ45F Auto MDI/MDI-X
- LEDEthernet Link (Green)
Ethernet Activity (Amber) - Ethernet specific featuresEthernet packet switching, Auto Negotiation, Link/Activity Status LED
- Network ProtocolsARP, BOOTP, DHCP/RARP, HTTP, HTTPS, SSH, SSL/TLS, ICMP, RFC 1006 (ISO over TCP), SNMP (MIB-II), TCP/IP & UDP socket services, Telnet, and TFTP, and supports IP multicast data transmission
Features
- SNMP SupportMONITORING ONLY
- Other Software FeaturesLowest Latency
NS-Link COM/TTY port redirector
TCP/IP & UDP Socket Services
Telnet/RFC2217 COM Port control
PortVision DX remote management - Manufacturer's Warranty5 Years
Export Information
- Packaged Shipping Weight0.85lbs
386g - Package Dimensions6-3/4 x 5-7/8” x 3-1/2”
171.45 x 149.225 x 88.9mm - UPC Code7-56727-99610-1
- Country of OriginUSA
- ECCN5A992
- Schedule B Number8471.80.1000
Device Drivers
- Microsoft® Windows® XP through Windows 10
- Linux
Regulatory Approvals
- EmissionsFCC Part 15 Subpart B
Class A limit
Canadian EMC Requirements
ICES-003
European Standard EN61000-6-4
European Standard EN55022
AS/NZS CISPR 22 - ImmunityEuropean Standard EN61000-6-2
European Standard EN55024
IEC1000-4-2/EN61000-4-2: ESD
IEC1000-4-3/EN61000-4-3: RF
IEC1000-4-4/EN61000-4-4: Fast Transient/ Burst
IEC1000-4-5/EN61000-4-5: Surge
IEC1000-4-6/EN61000-4-6: Conducted Disturbance
IEC1000-4-8/EN61000-4-8: Magnetic Field
IEC1000-4-11/EN61000-4-11: Voltage Dips and Voltage Variations
We will inform you if the price of this product will be changed according to your wished price.
Review product
No review available for this product.