The CIFX 50E-2DP supports the following protocols:
PROFIBUS DP Master
PROFIBUS DP Slave
Technical Specifications
Product Product Name CIFX 50E-2DP
Item Number 1253.410
Description PC card cifX PCI Express 2-channel PROFIBUS DP Master or Slave
Function Communication interface with PCI Express and 2 x PROFIBUS interfaces
Communication controller type netX 100
Integrated memory RAM 8 MB SDRAM
FLASH 4 MB serial Flash EPROM
System interface Bus type PCI Express, single-lane port
Transfer rate 2 Gbit/s
Data access DPM or DMA (Direct Memory Access)
Data width 32 bits
Communication interface 1 Communication standard PROFIBUS
Interface type RS-485, potential-free
Insulation voltage 1000 V DC (tested for 1 minute)
Connector D-Sub socket, 9-pin
Communication interface 2 Communication standard PROFIBUS
Interface type RS-485, potential-free
Insulation voltage 1000 V DC (tested for 1 minute)
Connector D-Sub socket, 9-pin
Power supply Supply voltage +3.3 V DC ±5 %
Maximum current consumption at 3.3 V (typical) 840 mA
Connection Via PCI Express bus
Indicators SYS LED, system status LED
COM 0, communication status LED 0 (duo LED)
COM 1, communication status LED 1 (duo LED)
Control element Rotary switch for slot number (card ID) For setting the slot number (card ID)
Permissible environmental conditions Operating temperature range -20 °C ... +70 °C (air flow during measurement: 0.5 m/s)
Storage temperature range -40 °C ... +85 °C
Relative humidity 10% … 95%, no condensation permitted
Environment For UL-compliant use: The device must only be used in an environment with pollution degree 2.
Altitude 0 m … 2000 m
Device dimensions (L x W x D) 120 mm x 94.5 mm x 18.5 mm
Mounting/installation PCI Express x1 slot (3.3 V)
RoHS compliance Yes
Compliance with EMC directives CE marking Yes
UKCA mark Yes
Emission EN 55011 / EN BS 55011 (Radio interference – Limits and methods of measurement)
Immunity EN 61000-4-2 / EN BS 61000-4-2: (against static electricity discharge)
EN 61000-4-3 / EN BS 61000-4-3 (against high-frequency electromagnetic fields)
EN 61000-4-4 / EN BS 61000-4-4 (against fast transient electrical disturbances)
EN 61000-4-5 / EN BS 61000-4-5 (testing against surge voltages)
EN 61000-4-6 / EN BS 61000-4-6 (against conducted disturbances induced by high-frequency fields)
EN 61000-4-8 / EN BS 61000-4-8 (against magnetic fields at power-frequency levels)
EN 61000-6-2 / EN BS 61000-6-2 (for industrial environments)
UL certification UL The device is certified to UL 508.
UL file UL file no. E221530
Configuration Configuration software SYCON.net
Deutsch
English