SNAP-AIVRMS-i-FM SNAP Isolated 2-Ch 0-250 V RMS AC/DC Analog Input Module, Factory Mutual Approved |
SNAP-AIVRMS-i-FM module may be used to monitor 120/240-volt AC/DC and 12/24/48-volt AC/DC system voltage and
is ideal for differential voltage measurements.
The two channels are isolated from each other; they do not share any field connection.
Part of the SNAP PAC System, the module mounts on a SNAP PAC rack with a SNAP PAC brain or rack-mounted
controller. Analog, digital, and serial I/O modules can all be on the same rack. Such an I/O unit is also well suited for PC-
based control or for use as intelligent remote I/O for an Allen-Bradley RSLogix PLC system, such as ControlLogix,
MicroLogix, or CompactLogix.
If you do not need isolated channels, see SNAP-AIVRMS.
The SNAP-AIVRMS-i-FM is Factory Mutual approved. If you do not need FM approval, see the SNAP-AIVRMS-i instead.
Input Range | 0 to 250 V RMS AC/DC |
Input Over-Range | To 275 V |
Input Resistance | 1 megaohms |
Accuracy | ±0.2 V and ±0.2% reading |
Resolution | 10 mV |
DC Reversal | ± 0.2 V (0.08%) |
Input Response Time (Step Change) | 63.2% (158 V) in 50 ms 99% (248 V) in 75 ms |
DC Common Mode Rejection | >-120 dB |
AC Common Mode Rejection | >-120 dB @ 60 Hz |
Maximum Operating Voltage Between Channels Common Mode Voltage | 250 V 250 V |
Isolation: Optical | 4000 V |
Isolation: Transformer | 1500 V |
Isolation: Channel to Channel | 250 V continuous (1500 V transient) |
Power Requirements | 5 VDC (±0.15 V) at 200 mA |
Ambient Temperature: Operating Storage | 0 °C to 70 °C -25 °C to 85 °C |
Torque, hold-down screws | 4 in-lb (0.45 N-m) |
Torque, connector screws | 5.26 in-lb (0.6 N-m) |
Agency Approvals | CE, RoHS, DFARS |
Warranty | Lifetime |
We will inform you if the price of this product will be changed according to your wished price.