Deutsch 
English | SNAP-LCE SNAP Ethernet compact industrial controller for ioProject systems |
  |
For new designs, see the standalone SNAP-PAC-S1 and the rack-mounted SNAP-PAC-R1 controllers. SNAP PAC
controllers provide more power and additional network connections. SNAP PACs run PAC Control strategies; ioControl
strategies can be simply upgraded to PAC Control.
------------
The SNAP-LCE is a stand-alone, small-footprint, Ethernet industrial controller designed for use with SNAP Ethernet I/O
units and the ioProject software suite. The SNAP-LCE provides real-time control and is used primarily in industrial
control applications. It is programmed with the included ioControl.
NOTE: The SNAP-LCE controller is NOT compatible with FactoryFloor.
| Processor | 32-bit ColdFire® 5407 |
| Memory Total RAM Battery-backed RAM Flash EEPROM | 16 MB 512 KB 8 MB (7 MB with firmware version 7.2) |
| Backup battery | 3-volt CR2032 Lithium, user replaceable. Typical service life with power off: 5 years. |
| Host communication | Ethernet (10/100 Mbps) or PPP (dial-up and radio modem) |
| I/O communication | Ethernet (10/100 Mbps) |
| I/O unit compatibility | Opto 22 SNAP Simple I/O, SNAP Ethernet I/O, and SNAP Ultimate I/O units |
| Serial ports | Two RS-232 ports. Baud rate is soft-selectable from 150–115,200 kBd. |
| Power requirements | 5.0–5.2 VDC at 1.2 A |
| Operating temperature | 0 °C to 60 °C |
| Storage temperature | -40 °C to 85 °C |
| Humidity | 0% to 95% relative humidity, non-condensing |
| Software | ioProject software suite (ioControl, ioDisplay, ioManager) Purchase OptoOPCServer separately to communicate using OPC. |
| Other features | FTP server/client with file system Real-time clock |