Deutsch 
English | SNAP-PS24U SNAP Power Supply, 100-250 VAC to 24 VDC |
  |
SNAP PAC S-series controller (such as the SNAP-PAC-S1) or for providing loop power for SNAP analog modules
mounted on a SNAP PAC rack.
AC power connections are made to a removable terminal strip on top of the power supply. DC output power is hooked
up using the attached wiring harness.
If you need fewer amps and can use a 120 VAC input, see the SNAP-PS24, which provides 0.75 A.
NOTE: The SNAP-PS24U can also be used to provide loop power for analog modules on a SNAP M-series or B-series
rack.
| SNAP-PS24 | SNAP-PS24U | |
| Input Voltage | 95–130 VAC, 47–63 Hz | 100–250 VAC, 47–63 Hz |
| Output Voltage | 24 ± 0.6 VDC | 24 ± 0.1 VDC |
| Output Current | 0.75 A | 1.25 A |
| Dimensions | 4.05˝ x 4.89˝ x 2.00˝ | 6.34˝ x 4.13˝ x 2.53˝ |
| Weight | 2.1 lbs (952.54 g) | 1.9 lbs (863.63 g) |
| Operating Temperature | 0 to 70 °C | 0 to 70 °C |
| Storage Temperature | -30 to 85 °C | -30 to 85 °C |
| Torque, connector screws | 4.5 in-lb (0.51 N-m) | 4.5 in-lb (0.51 N-m) |
| Fuse | Opto 22 PN: SNAP-FUSE1AB Vendor PN: GDC-1A (Bussman) | Internal fuse |