Deutsch 
English TRP-C08 USB to RS-232/422/485 Isolated Converter (Version:3.0, 100% compatible with older generations)
Introduction
The TRP-C08 allows you to connect your serial devices to systems by using a USB interface.
With auto configuration in data format, baud rate and RS-485 data flow direction control.
TRP-C08 is able to automatically configure RS-232,
RS-422 or RS-485 signals to baud rate without external switch setting.
TRP-C08 is equipped with 3000V DC of isolation and internal surge-protection on
each data lines to protect the host computer and converter against high voltage spikes,
as well as ground potential difference.
TRP-C08 also features a high-speed 256 Kb/s transmission rate, and supports various O.S.
The industry DIN rail and panel mounting design enable user a fast and professional installation.
Features
Full compliance with the USB V1.0 and 2.0 specification.
System gets 1 COM port when the converter is connected.
Auto data format detecting.
Auto direction flow control on RS-485.
Programmable baud rate from 75 bps to 6 Mbps
RS232/422/485 Support 3KV isolation
256 byte buffer for upstream and downstream data flow.
Direct power from USB port , no external power necessary.
3000V DC isolated protection.
Surge protection on RS422/485 data lines.
Power/TX/RX mode LED indicator.
DIN rail or panel mount support.
Driver support: Android/Windows 8/8.1/10/11/ 98/ME/2000/XP/CE3.0,
and Linux, and Mac OS.
Specifications
USB interface: Fully compliant with V1.0, 2.0 specification.
USB to serial bridge controller; Prolific PL2303TA (TRP-C08 Version:2.1).
RS-232 signal: 5 full-duplex (TXD, RXD, CTS, RTS, GND).
RS-422 signal: Differential 4 full-duplex wires (TX+, RX+, TX-, RX-).
RS-485 signal: Differential 2 half-duplex wires (D+, D-).
Data Format: Asynchronous data with all common combination of bits, parity, stop.
Parity type: None, odd, even mark, space.
Data bit: 5, 6, 7, 8 or 16.
Stop bits: 1, 1.5, 2.
Cable: USB type A to type B.
Communication speed: 75~128KBbps.
RS-422/485 line protection: Against surge, short circuit, and voltage peak.
Transmission distance: RS-422/485 Up to 4000ft (1200M ).
Connection type: Screw terminal accepts AWG #12~30 wires.
Signal LED: Power on, TX, RX.
Direct power from USB port.
Power consumption: 1.2W.
Isolation voltage: 3000V DC.
Operating environment: -10 to 50? .
Storage temperature: -20 to 70?.
Humidity: 10-90% Non-condensing.
Dimension: 151mm X 75mm X 26mm .
Weight: 375g .
- Bus
- USB