Deutsch 
English | SNAP-SCM-232 SNAP 2-Ch RS-232 Serial Communication Module |
  |
data. Used with a brain or R-series controller, the module connects serial devices such as printers, scales, chart
recorders, and barcode systems to an Ethernet network for control, monitoring, or data acquisition.
Part of the SNAP PAC System, the module mounts on a SNAP PAC rack with a SNAP PAC brain or rack-mounted
controller. Analog, digital, and serial I/O modules can all be on the same rack. Such an I/O unit is also well suited for
PC-based control or for use as intelligent remote I/O for an Allen-Bradley MicroLogix PLC or other RSLogix-based
system, such as ControlLogix or CompactLogix.
NOTE: The SNAP-SCM-232 can also be used with a legacy SNAP Ultimate, SNAP Ethernet, or SNAP Simple brain.
For similar serial communication using RS-485/422, see SNAP-SCM-485-422.
| Baud rates | 300–115,200* |
| Channel-to-channel isolation | 750 VRMS |
| Logic supply voltage | 5.0 VDC |
| Logic supply current | 250 mA DC |
| Number of ports per module | 2 (1 if SNAP-SCM-485-422 in 4-wire mode) |
| Max. number of modules per rack** | 8 |
| Maximum cable length, point-to-point (SNAP-SCM-232) | 50 feet |
| Maximum cable length, multidrop (SNAP-SCM-485-422) | 1,000 feet at 115,200 Kbd |
| Processor compatibility | SNAP PAC R-series controllers and SNAP PAC EB brains, both standard wired and Wired+Wireless models. Also SNAP-B3000-ENET, SNAP-ENET-RTC, SNAP-ENET-S64, SNAP-UP1-ADS, and SNAP-UP1-M64. |
| Operating temperature | 0 to 70 °C |
| Storage temperature | -30 to 85 °C |
| Torque, hold-down screws | 4 in-lb (0.45 N-m) |
| Torque, connector screws | 5.26 in-lb (0.6 N-m) |
| Agency Approvals | CE, FM, RoHS, DFARS |
| Warranty | 30 months |
| * Module performance is limited by the number of serial modules on the SNAP rack. Each rack backplane provides approximately 2.5 Mbps of bandwidth. ** Maximum number of modules per rack assumes an Opto 22 SNAP power supply and SNAP rack. | |