Trycom TRP-C08 (Version 3.0)

TRP-C08   USB to RS-232/422/485 Isolated Converter (Version:3.0)

Introduction

The TRP-C08 allows you to connect your serial devices to systems by using a USB interface. 

With auto configuration in data format, baud rate and RS-485 data flow direction control.

TRP-C08 is able to automatically configure RS-232,

RS-422 or RS-485 signals to baud rate without external switch setting.

TRP-C08 is equipped with 3000V DC of isolation and internal surge-protection on

each data lines to protect the host computer and converter against high voltage spikes,

as well as ground potential difference.

TRP-C08 also features a high-speed 256 Kb/s transmission rate, and supports various O.S.

The industry DIN rail and panel mounting design enable user a fast and professional installation.

Features

Full compliance with the USB V1.0 and 2.0 specification.

System gets 1 COM port when the converter is connected.

Auto data format detecting.

Auto direction flow control on RS-485.

Programmable baud rate from 75 bps to 6 Mbps

RS232/422/485 Support 3KV isolation

256 byte buffer for upstream and downstream data flow.

Direct power from USB port , no external power necessary.

3000V DC isolated protection.

Surge protection on RS422/485 data lines.

Power/TX/RX mode LED indicator.  

DIN rail or panel mount support.

Driver support: Android/Windows 8/8.1/10/11/ 98/ME/2000/XP/CE3.0,

and Linux, and Mac OS.

Specifications

USB interface: Fully compliant with V1.0, 2.0 specification.

USB to serial bridge controller; Prolific PL2303TA (TRP-C08 Version:2.1).

RS-232 signal: 5 full-duplex (TXD, RXD, CTS, RTS, GND).

RS-422 signal: Differential 4 full-duplex wires (TX+, RX+, TX-, RX-).

RS-485 signal: Differential 2 half-duplex wires (D+, D-).

Data Format: Asynchronous data with all common combination of bits, parity, stop.

Parity type: None, odd, even mark, space.

Data bit: 5, 6, 7, 8 or 16.

Stop bits: 1, 1.5, 2.

Cable: USB type A to type B.

Communication speed: 75~128KBbps.

RS-422/485 line protection: Against surge, short circuit, and voltage peak.

Transmission distance: RS-422/485 Up to 4000ft (1200M ).

Connection type: Screw terminal accepts AWG #12~30 wires.

Signal LED: Power on, TX, RX.

Direct power from USB port.

Power consumption: 1.2W.

Isolation voltage: 3000V DC.

Operating environment: -10 to 50? .

Storage temperature: -20 to 70?.

Humidity: 10-90% Non-condensing.

Dimension: 151mm X 75mm X 26mm .

Weight: 375g .