OPT-SNAP-SCM-MCH-16

SNAP-SCM-MCH16 SNAP Motion Control Host Communication Module, 16 Axes

The SNAP-SCM-MCH16 motion control host module is a key part of the SNAP PAC Motion Control Subsystem for the
SNAP PAC System. Typically, the SNAP-SCM-MCH16 works with a SNAP PAC controller running a PAC Control
programming strategy to control up to 16 stepper motors.
 
A single SNAP-SCM-MCH16 links up to four SNAP-SCM-BB4 motion control breakout boards. Each breakout board is
equipped with a Magellan(TM) processor chip set that outputs pulse and direction signals for up to four stepper motor
systems.
 
Part of the SNAP PAC System, the module mounts on a SNAP PAC rack with a SNAP PAC brain or rack-mounted
controller. Analog, digital, and serial I/O modules can all be on the same rack. Such an I/O unit is also well suited for
PC-based control or for use as intelligent remote I/O for an Allen-Bradley MicroLogix PLC or other RSLogix-based
system, such as ControlLogix or CompactLogix.
 

Baud rates	115,200
Parity	Even
Data bits	8 only
Logic supply voltage	5.0 to 5.2 VDC
Logic supply current	250 mA1 500 mA2
Number of ports per module	1
Maximum number of modules per rack	81
Maximum cable length, multi-drop	1,000 feet at 115,200 Baud
I/O processor (brain or on-the-rack controller) compatibility	SNAP-PAC-R1, SNAP-PAC-R2, SNAP-PAC-EB1, or SNAP-PAC-EB2
Operating temperature	0 to 70 °C
Storage temperature	-30 to 85 °C
Torque, hold-down screws	4 in-lb (0.45 N-m)
Torque, connector screws	5.26 in-lb (0.6 N-m)
Agency Approvals	CE, RoHS, DFARS
Warranty	30 months
1. Each breakout board is powered by a separate power supply. 2. Breakout board uses power from the module.