B&E CT-N108 V2.8 Network Arcnet Adapter
Hersteller / Producer: B&T former Corman Technologies, Inc.
Produkt-Bez. / brand name: CT-N108 V2.8
TECHNISCHE SPEZIFIKATIONEN / technical Specification
- Rev: V2.8 Mbps: 2.5 Bus: ISA Bit: 08 IRQ: 03-07
- Topology: S Connector: BNC Arcnet-Chip: COM90C66 Style: QFP Length [mm]: 130/145
- Style Legend: DIL(Dual In-Line), LCC(Leaded Chip Carrier), QFP(Quad Flad Pack), Topology: S(Star), B(Bus)
ARCNET Adapter PC Coax QNX
Dieser Adapter ist eine angepasste ARCNET Adapter hergestellt ausschließlich für QNX Software Systems Ltd Dieses Produkt ist jetzt erhältlich. Ursprüngliche QNX Software Systems Teilenummer: 003049.

B&E Technologies CT-N108
CorNet Arcnet Adapter PC Coax QNX
| DESCRIPTION | |
| This is a coax ARCNET adapter. This adapter is fully compatible with both QNX 2 and QNX 4. | |
| OPERATING ENVIRONMENT | |
| Power: | +5V DC +/-5% @ 1A (typicalles than 200mA) |
| -12V DC +/- 5% @ 21 mA | |
| Operating Temperature: | 0 to 43 ºC |
| Storage Temperature: | -40 to 125 ºC |
| Humidity: | 5% to 80% (non-condensing) |
| Signal Levels: | Transmit: 15.4 Vp-p Receive sensitivity: 3.0 Vp-p |
| ARCNET LAN INTERFACE | |
| Modified Token Passing Local Area Network | |
| 2.5 Megabaud transmission rate | |
| Supports up to 255 nodes | |
| Requires only 8 kbytes of Address Space | |
| IBM PC, XT, AT and compatible | |
| Switch selectable memory map base address (CC00,CE00,DC00,DE00,EC00,EE00) | |
| Menu selectable node ID and interrupt level (levels 2,3,4,5,6 & 7) | |
| 2 KB dual ported RAM buffer for high speed interleaved message transfer | |
| Software reset capability | |
| PHYSICAL SPECIFICATIONS | |
| PCB mounted low profile BNC connector to RG-62 A/U 93 Ohm ciaxial cable | |
| green LED indicates that the network is operating normally | |
| red LED indicates node activity | |
| Short length 8 Bit ISA Bus Card ( 4.97" long) | |
| INSTALLATION CONSIDERATIONS | |
| Coax cable type | RG62A/U93 ohm with BNC connectors |
| Coax distances | From node to hub 2000 ft. (600m) |
| Total network span up to 22,000 ft (6600m) (using standard time-outs) | |
| Maximum of 10 active hubs may be between any two nodes on the network | |
| CONFORMS TO THE FOLLOWING STANDARDS | |
| ARCNET: | ANSI 878.1 |
| EMC: | EN55022:1994 (Emissions) |
| CISPR 22 1993-12 Class A | |
| FCC Part 15 Class A | |
| EN 50082-1 (Immunity) | |
| IEC 801-2:1991 | |
| 8KV Contact, 15KV Air | |
| IEC 801-3:1984 | |
| 3V/m | |
| IEC 801-4:1988 | |
| 0.5 KV Signal line, | |
| 1 KV Power line | |
| European CE compliance | |
- Bus
- ISA
Deutsch
English 