Deutsch 
English B&E Technologies FES-517
10/100 Fast Ethernet Switch 16TX/1FX with Management(EOL)
| The FE-517 is the latest in our family of Fast Ethernet switches. It is a 16 port switch with a port for an optional 2km fiber optic link. Automatic cable detection on each port allows all ports to select 10Mbps or 100Mbps and MDI (crossover) or MDI-X (straightthrough) cabling. The built in management interface allows VLAN, QoS, trunking and port configuration. The CT-FE517 remains an affordable solution for your network and includes a full two year warranty. | |
| Switch Features | |
| 10 or 100Mbps transmission rate | |
| Full or half duplex (full duplex required for maximum transmission distances on the fiber optic port) | |
| Switch Type: Store and Forward | |
| Filtering Rate: 14,880pps for Ethernet (10base-T) 148,800pps for Fast Ethernet (100TX) | |
| Forwarding Rate: 14,880pps for Ethernet (10base-T) 148,800pps for Fast Ethernet (100TX) | |
| QoS: 4 queues per port | |
| Filtering Address: Multicast/Broadcast/Unicast address 2K MAC addresses per unit | |
| VLAN: up to 15 VLAN groups | |
| Supports trunking, which allows the connection of multiple ports to other switches to increase bandwidth between switches: | |
| -Two-port trunks: Up to 2 trunks | |
| -Bandwidth: 400 Mbps full duplex per trunk | |
| Management / configuration via built-in RJ-45 serial port (cable provided) and a standard terminal emulator | |
| Operating Environment | |
| Power: | 100-240VAC, 50/60Hz,15W max |
| Operating Temperature: | 0ºC to 50ºC |
| Storage Temperature: | -40ºC to 70ºC |
| Operating Humidity: | 10% to 90% (non-condensing) |
| Storage Humidity: | 5% to 95% (non-condensing) |
| Available Fiber Modules | |
| FESM-517-MT Multi-mode with ST connector | |
| FESM-517-MC Multi-mode with SC connector | |
| FESM-517-SC Single-mode with SC connector | |
| Physical Specifications | |
| Rack or Table mountable chassis | |
| LED indicator for power and for each port | |
| Link/Act.: | Indicates the link status with a connected device as well as the connection speed between the UTP port and the connected device. |
| FDX/Col.: | Indicates the duplex mode and collision occurrences. |
| Dimensions: | 430mm x 105mm x 44mm (WxDxH) (16.9" x 4.13" x 1.73") |
| Conforms to the Following Standards | |
| LAN: | IEEE 802.3u 100base-TX |
| IEEE 802.3u 100base-FX | |
| IEEE 802.3 10base-T | |
| EMC: | EN55022 IEC1000-4-2 |
| EN60555-2 IEC1000-4-3 | |
| EN60555-3 IEC1000-4-4 | |
| Products are marked as certified to the CE and FCC standards. | |
| Installation Considerations | |
| 100FX FAST ETHERNET | |
| Fiber Optic Cable | 62.5/125µm 1300nm multimode fiber optic cable is recommended |
| 50/125µm, 85/125µm or 100/140µm 1300nm multimode fiber optic cable can also be used | |
| Modules available in multimode dual ST connectors (CT-FE052T) or multimode dual SC connectors (CT-FE052C) | |
| Distance from port to port: 2km (1.25 miles) | |
| 100TX FAST ETHERNET | |
| Twisted Pair Cable | Category 5 unshielded twisted pair |
| RJ-45 connector | |
| Distance from port to port: 100m (325 ft) | |
| 10base-T ETHERNET | |
| Twisted Pair Cable | Category 3, 4 or 5 unshielded twisted pair |
| RJ-45 connector | |
| Distance from port to port: 100m (325 ft) | |
| Warranty | 2 years |
We will inform you if the price of this product will be changed according to your wished price.
Review product
No review available for this product.