Deutsch 
English 4S Seriell RS-232/422/485 PCI-Express Card with LowProfile Ironing and Octopus cable ( System Base Chip Set )
DESCRIPTION
The EX-45364 PCIe I / O card provides four RS-232 serial,
422 and 485 High Performance UART 16C1050 outputs
Available. Each port can independently of interfaces
Type can be set. It has been developed to four
additional serial combo ports for PC, thin client
or Server to expand via the PCI bus. The card is
Fully PCI or PCI-X plug-and-play compatible and has
no problems with IRQ and I / O address conflicts. You
supports features ATA Auto RS-485 transmitter.
Additional is + 5V or + 12V on pin 9 of the serial
RS-232 connector connector for a POS System (Power
over system).
- Interface: 4x RS-232 V.24, RS-422/485
- Independent mode selection
- FIFO Buffer: 16C1050 with 256Byte
- I / O addresses and Interrupt: Setting from the System BIOS
forgive, IRQ sharing
- Data bits: 5, 6, 7, 8 / Stop Bits: 1, 1.5, 2
- Parity: none, even, odd, space, mark
- RS-232 signals: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
- Signals RS-422-4-wire (TXD +/-, RXD +/-) (Full Duplex)
RS-485-4-wire (TXD +/-, RXD +/-) (Full Duplex)
RS-485-2 Wire (Data +/-, Data +/-) (Half Duplex)
- Supports ATTA Car Transmitter
- Termination RS-422/485 120 Ohm can be switched on and
turn off
- Chip-Set: Base System SB16C1054PCI
- Data transfer rate: 50 Baud up 921.6KBaud
- Connections: 1 x 44 pin socket for connecting
the Octopus cable with 4x 9 pin
Serial RS-232/422/485
- Hardware system: PCI Express Slot x1 to x16
- Operating Systems: Win98, ME, 2000 / XP / Vista / 7/8 / 8.1 /
Server 200x (32 & 64)
SCO Unix, Linux 2.4 or later
- Power supply: 3.3 volts from the PCIe slot
- Dimensions: 110 x 68mm / cable length from
Octopus cable: 30cm
- Weight: 800g
- Delivery: EX-45364, Octopus cable, Low
Profile bracket, Driver CD, Manual