Deutsch 
English 10Base-2 BNC <> 10Base-T RJ-45 Ethernet Converter
OVERVIEWCEM0100 is a media translator that translates the signals between Ethernet 10Base-T UTP medium and thin Ethernet 10Base-2 coaxial medium. Collision data is also translated to ensure 100% collision detection in any combination of network segments or devices. CEM0100 is an ideal solution to provide the connection between 10Base-T and Thin-Net backbone where BNC port is not available on the existing 10Base-T concentrator. Instead of replacing the 10Base-T concentrator with the one equipped with BNC port, CEM0100 can provide the solution at very low cost.With the size similar to a match box, CEM0100 can easily be installed in the limited space environment. 4 diagnostic LED indicators provide clear and quick diagnosis if any network problem is encountered. CEM0100 comes with an external AC power adapter. |  |
DEVICE DRIVERS SUPPORTED
Filename: n/aIncluded Drivers:n/a
TECHNICAL SPECIFICATIONS
- Model:CEM0100
- PC Supported:n/a
- Standards:IEEE 802.3 Ethernet 10Base-T and 10Base-2
- Network Connector:
UTP RJ-45 jack (MPR/DTE Switch Selectable), 1 BNC connector
( Both RJ-45 jack and BNC connector are located on the SAME end. Please refer to above picture.) - LAN Controller:n/a
- Data Transfer Rate: 10Mbps
- Duplex:Half
- Cable:Unshielded Twisted-pair Category 3/4/5, RG-58A/U coaxial cable
Cable Limitation:
UTP (max.) : 100m (328ft) Coaxial (max. per segment) : 185m (607ft) - LEDs: POWER, BNC ACT, TP ACT, and COL
- Power Requirement: 1A@+5V DC
External Power Adapter:100-240V AC, 50/60Hz, 0.5/0.25A - Ambient Temperature: 0° to 50° C
- Humidity: 5% to 90%
- Dimensions:26.2 x 70.3 x 94 mm (H x W x D)
- EMI Rating: FCC Part 15 Class A and CE Mark